Print | Rate this content

HPE ProCurve Switches - HP Static LACP Trunk Configuration

Information

HP static LACP trunk configuration.

Details

The following defines a trunk as static LACP. The trunk group trk1 is then assigned to VLAN 10 in which an IP address is defined.


Conf t
trunk a1-a6 trk1 lacp
vlan 10
untagged trk1
ip address 10.1.10.1/24
exit

ProCurve1# show trunk

Load Balancing

Port | Name Type | Group Type
---- + --------- + ----- ----
A1 | 100/1000T | Trk1 LACP
A2 | 100/1000T | Trk1 LACP
A3 | 100/1000T | Trk1 LACP
A4 | 100/1000T | Trk1 LACP
A5 | 100/1000T | Trk1 LACP
A6 | 100/1000T | Trk1 LACP

ProCurve1# show lacp

LACP

PORT LACP TRUNK PORT LACP LACP
NUMB ENABLED GROUP STATUS PARTNER STATUS
---- ------- ----- ------ ------- -------
A1 Active Trk1 Up Yes Success
A2 Active Trk1 Up Yes Success
A3 Active Trk1 Up Yes Success
A4 Active Trk1 Up Yes Success
A5 Active Trk1 Up Yes Success
A6 Active Trk1 Up Yes Success

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!